Posts

Chosen Solution i accidentally leaned on the back of my headphones and the headband snapped. it’s enclosed in fabric and padding, so I’m not sure how to get to it without cutting the fabric. they’re still usable, but kind of unstable https://www.amazon.com/Bluedio-Turbine-W… Hey i fixed mine by unscrewing the silver part of the head band that says turbine. Then i cut an amazon gift card in half and slid on half on top of the break one on the bottom and taped them together....

Chosen Solution this is driving me crazy. I tried everything. changed the home button, not working. changed the whole front panel, not working. changed the power connector which seemed faulty, not working. home button in this iphone 6 doens’t want to work anymore. Does the home button wake the phone?

Chosen Solution Sony KD 55XD9305 Hi, I need help with this situation: So it all started during this quarantine when I was watching Youtube on TV and I paused the image to go to the Kitchen, when I came back 2 white thin horizontal line appeared next to each other on the lower part of the TV, then above that line all image is blurry, it seams the image doubled vertically and the colour is slightly different....

Chosen Solution Most teardowns I can find only remove the top half from the bottom. I have yet seen a teardown where the pcb is removed from the top half of the case. I have not seen any that could not be separated from both top & bottom. You just need to find the screws holding the PCB to the top. When I disassembled my G915, I could never get the front part off....

Chosen Solution My iPhone 5s died on me and it’s the motherboard. How can i change it? or where should I go to have it changed? i bought it of ebay thinking it’s a easy battery fix. well… it wasn’t. Apple doesn’t what to replace the phone because the find my iPhone app is still on in the device. Any suggestions? The motherboard IS the phone. If you need a new motherboard, you need a new phone....

Chosen Solution My MacBook Air won’t let me boot into any mode And I would like to boot windows of a flash drive… how can I make this go away? You’ll need to visit an Apple Store with your purchase receipt to get it unlocked. As far as running Windows from an external drive thats not possible as you need to use BootCamp within MacOS or run Windows natively on the internal drive....

Chosen Solution My transmission dose not have a dip stick and i need to check the level and do not have the money to go to a repair shop. How do i check it Thomas Wahab, this from the ownders manual “It is not necessary to check the transaxle fluid level. A transaxle fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to the dealership service department and have it repaired as soon as possible....

Chosen Solution Hi I have a Swift 1 which I need to repair /replace the power button. It does still function, but it takes a lot of thumb pressure and wiggling my thumb up and down the button. I don’t know how the switch actually works, but am guessing that there is a contact which is worn? Any advice or websites / you tube videos which might help me understand how it works - and the best way to go to get it fixed will be gratefully received!...

Chosen Solution Hi, I have a lot of screwdrivers, knifes, pliers, spudgers etc. But I don’t have a good system for it. I’ve just put them in a stand for pens and office supplies. I really needs a better system to satisfy my self-diagnosed OCD. How do you organice your tools? Post a description or most preferably a picture, or a link if you use products available in webshops. I just put them in a plastic container, all together....

Chosen Solution my phone is glitched Trina Rembert that will entirely depend on what make and model your phone is and what is wrong with it. “my phone is glitched” really is not enough information. iFixit does not offer repairs. Here you get advice and solutions that will empower you to fix your own device. If you want somebody else to fix it, do a good online search and see if you find something that appeals to you....

Chosen Solution Hi. I bought my MacBook in Sweden and work in uk now. Is it possible to change the actual key sets to English. @mobraf you could replace the keyboard (PITA) with instructions from here. This one is more in detail. Even so it is an older model, the process is identical for the keyboard, It follows the upper case removal as shown here MacBook Pro 13" Retina Display Early 2015 Upper Case Replacement or just replace the complete upper case with the keyboard ($$$)....

Chosen Solution How to fix my tablet after dropping it in water.??? Hi, Please confirm the make and model number of the tablet if it is not an Ematic EXP8? The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the tablet’s operating design and could damage the components. The corrosion starts immediately and is ongoing until it is completely cleaned away First do not try to charge or to turn on your tablet and then remove the battery as soon as possible from the tablet to minimize any further damage....

Chosen Solution I have had this computer for about 2 years, when suddenly, the power button was found stuck down! I could pry it back out, but upon pressing it in again, no resistance from the spring. Any fixes i can do for this? Remove the power button board and look at underside of power button. It should have some plastic tabs which give it some elasticity. Where the button touches the power button board you should be able to feel a slight click with your finger when you push on it....

Chosen Solution The lens cover on my One Touch Fierce has become cracked to the extent all my photos are blurry. How would I get replacement parts ? Can I replace this myself? My glass over my lens broke too, all I did was take all the pieces out and the camera still seems to work fine. if you wanna fixed your cracked screen then watch this - https://www.youtube.com/watch?v=ZnKruLgu…

Chosen Solution I notice that my voice is so soft when I speak through the microphone and no matter how close my mouth is, it still sound so soft. When I open the microphone area, I found two green wires not attached to the board. Can anyone tell me where the wires supposed to go? Update (03/02/2021) this is the microphone board… Hello, according to the image these wires power an LED and doesn’t have anything to do with the microphone, if your voice is soft then it’s probably not due to bad wiring because the microphone either works or not....

Chosen Solution the charging port is broken. it was finiky and only charged sometimes or when the cable was held at certain angles, but now it wont charge at all The charge port on nearly all iPads is a job that will need soldering know how to complete. If you have the gear and know how for that it’s a fairly straight forward repair. You’ll need to follow the Logic Board replacement guide to get the board out....

Chosen Solution Is there a guide for replacing the fan? Bought a replacement fan for the cpu but cant uninstall original fan. Are you replacing one single fan like this over the CPU? https://www.laptop-coolers.com/laptop-fa… If so, watch this video, https://www.youtube.com/watch?v=VApI9A4s… It is Chinese, but I watched with no audio. Only video that I could find to help demonstrate what you need to do. Kinda skipping through the video, what you like to see is straight from “5 mins in” to “15 mins in”… He shows him taking out the entire cooler, and replacing thermal paste....

Chosen Solution how do i get phone back without password it wants i changed password it is my account After you’ve tried to unlock your device multiple times, you’ll see “Forgot pattern”. Tap Forgot pattern. Enter the Google Account username and password you previously added to your device. Reset your screen lock. Learn how to set a screen lock. If you are also dealing with such errors on your device, do not worry, just follow these tips to break the password on your samsung phone....

Chosen Solution Is the LCD screen part for the Gopro Hero3+ silver compatible with the black edition? Hi I’m looking for a part for my Microsoft pro 3. When replacing the lcd we have misplaced the small board that sits between the lcd connection and the motherboard. Is this something you can help with. Thanks Chris inver by i-repairs

Chosen Solution It may be too late but last afternoon the case cracked and some water got in, I noticed some salt forming from the water evaporating and also noticed it was getting pretty hot. I took out the battery and SD card but the SD card is broken. Now it will not turn on or charge. Again it might be too late but any ideas? I’m not sure who to thank for the information on water damage for my GO PRO 3, cleaning all the internal parts with Isopropyl Alcohol worked, I was about to replace the mother board, and thank you for the tear down information of GoPro Hero 3 as well....