Chosen Solution when I plug my charger in my nook it does not work. I have bought a new charger and that’s not that problem its the charging port. Yes, I found a used nook @ yard sale. B4 tearing down the yard sale nook, I √ to make sure it was going to charge 1st. Then I removed the port from that one & replaced my bad port. Take ur time & be very very careful....
Chosen Solution how do i open my xperia E4 to remove the sim card Hi, First turn off the phone and then go to p.7 Assembly in the user manual to see how to remove the back cover and then to insert/remove the SIM card.
Chosen Solution Got this laptop a few years back and it isn’t working with the track pad? Rewire needed or can I order a part? if you are familiar you can change the trackpad only if not you can order the palmerst (the upper case ) and change it
Chosen Solution How can i retrieve data from corrupt USB drive You may not be able to do so. It is important to not write anything back onto the drive. There are a number of data retrieval apps that depend on what OS you’re using. The process is that you make a copy (if possible) of the data onto a good working backup volume and then retrieve data from there. As a Mac user I have had good results from DataRescue3, and also from Cardwiper an app....
Chosen Solution I recently went on find my iPhone and erased my iPad but now that I did that I can’t enable my restrictions anymore. Can someone please help me? As long as you can reset the iPad and set it up as a new iPad either through iTunes or from the iPad itself, restrictions should be able to work. If the iPad has preloaded information, try restoring from a backup stored on iCloud or iTunes and enable restrictions....
Chosen Solution how much it cost to get the front screen & back , the battery fix? @sesmar8263 that is a very subjective question and you can get tons of different answers. Since we are not in the habit of suggesting any kind of outside vendors you want to check the iFixit business partners on here https://www.ifixit.com/Business These are people that have proven that they are trustworthy and reliable. In short, they have the iFixit community stamp of approval....
Chosen Solution I just got an iPhone 7 and I commute via motorcycle Over 100 miles a day. I use a waterproof case that clamps to my handlebars to keep it in so I can view it, change music, etc. The new home button does not work through the case. I know the phone is waterproof and I don’t have a problem cutting a hole in the case if I have to....
Chosen Solution How to change the speed mode on Xiaomi Qicycle ? Can’t understand chinese language. It has 4 type of speed and nobody give any clue by a picture. Everyone just say this, say that, but no one ever talk about the onboard computer and how to use it. I’ve checked the manual guide and no guide about this small computer and how to operate it. Thanks for the time....
Chosen Solution Would like to give away my HP Laptop and notebook but first delete all my files. How do I do this? Cee Dee, See the link’s below to prep your laptop before giving it away.lots of good information. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://dealnews.com/features/Erase-Perso… http://smallbusiness.chron.com/erase-per… https://www.howtohaven.com/system/prepar…
Chosen Solution Hello, hope this finds you all well. Have an older Panasonic ES8003 wet/dry shaver I need to replace the battery on. does anyone have a breakdown on how to open it up and remove batteries? I have found videos on youtube, but its nor of the same ES8003 model and the disassemble is different. thank you much for any help:) @whansen check the illustration from the manual. There should be two Phillips screws on the bottom that you need to remove, then remove the cap....
Chosen Solution I Change my 2006 chevrolet equinox engine to a new one, but I try start the engine I discover thats know distribution of correct to the plugs. Please what could be the problem. Most likely a problem with the distributor
Chosen Solution How to reset the phone Depends on which HTC you have, if it is the from the ONE Series then when the device is powered off hold the power and volume down buttons down at the same time which will bring you in to recovery mode, from there it should be able to perform a factory reset
Chosen Solution when using a device on high or middle brightness the notification bar starts getting blur and time and recent notification that we have cleared at seen in blur effect in background. even if we use some app like messenger, keyboard even those start reflecting while the other app is open. Might need to replace lcd
Chosen Solution Hello this is regarding ‘Blaupunkt New Jersey 220 BT’ car stereo. (http://www.crutchfield.com/p_023NJ220BT/…) On the backside of this device there are 4 RCA jacks (2 red and 2 white) . can you please let me know what these are for. Are these pre-amp outputs? I have a rather different question. I want to use this device at home instead of a car. Basically use this as a home music system....
Chosen Solution Currently trying to mirror my phone screen ( a UMX model U696CL through assurance wireless) to my sanyo tv (model FW40D36F B) and it won’t work I’m using a normal HDMI cord and adapter to connect from tv to phone, I know the cord and adapter work. Idk what to do please help Hi @babyalexisxx , If you haven’t already done so, try enabling Apps > Settings > Connected Devices > Cast and see if that works,
Chosen Solution I can only hear the weather but I can’t transmit a signal or listen to anyone else. Are you using the correct antenna unit? What does the onboard diagnostics telling you?
Chosen Solution Hi, I recently replaced my GoPro Hero4 Silver’s front LCD and I may have messed something up. My camera no longer records any audio with or without an external microphone. I’m not sure what could be broken or what I disconnected, any help would be great! Thank you. I’m not at work however I believe the mic is in the top of the rear shell. When I get in tomorrow I will confirm this....
Chosen Solution I did all white vinegar things (all videos are about this) and i am sure batteries are working and board have voltage (measured with multimeter and even seperated left click board have voltage about 1.8V) but somehow mouse is not working. No water damage no bending or no burn sign. Any idea? Things do wear out ;-{ Time for a new one, see if you can get a used one....
Chosen Solution Hi. Approximatly a week ago my mac shut down. When i started my computer, i got to the login phase, but during the login a lot of text came upon the screen and the mac shut itself down. I did a apple hardware test and got this result: 4hdd/11/40000004:SATA(0,0) I then erased the hard drive and tried installing osx. It did not work by network, so I installed os x high sierra by USB....
Chosen Solution Did not see these items in your teardown of the FitBit Surge. Are they in there and could you tell me who the MFG is? Looks like a MEMS 3-axis accelerometer, but I can’t find the part number for that or the gyroscope without the device in hand. Maybe https://www.ifixit.com/User/1210134/Tiag…, the author of the teardown, still has the device and would be willing to look?
