Posts

Chosen Solution How do I replace the charging port on an ipod touch? The cord was accidentally yanked out and broke a couple prongs inside the ipod. So it will no longer charge or connect to PC. On the 2nd generation, the dock connector is solder to the board. Check on the guide iPod Touch 2nd Generation Logic Board Replacement page 5 shows the dock connector. So you have to remove the logic board and then remove the dock connector by de-soldering it as well as the 2 prongs on the side that hold it on the logic board....

Chosen Solution zoom dynamo replacement Hi @kukiteddy Here’s a link to the Samsung DV300F Lens Replacement guide. Here’s a link to just one supplier of a lens zoom unit. It is just shown to give you an idea of the cost of the part. There may be other suppliers online that will suit you better. Just search for Samsung DV300F lens unit to get results for suppliers of the part. Hopefully this is of some help....

Chosen Solution I have broke my Mac Mini IR Sensor while upgrading to SSD. Should I leave it as it is? Or how should I fix it as I cannot attach that ir sensor cable to logic board. Please help on what should I do? What did you break the sensor its self trying to take the screw out or damage the connector on the interconnect board? Seen here: If that is what you did post a few pics so we can see the condition of the board at the connector as well as what you have on the other end of the cable Adding images to an existing question

Chosen Solution My LG3 cannot function with Goole maps or Mapsme or even Waze. I do have a sim card. Any suggestions? For Google Maps issue The issue can be application based. You have denied Google Maps access to your location before. Browser errors. In Google Chrome browser Open Google Chrome browser. Click on the Menu icon with 3 lines at the top right corner. Go to Settings. Scroll down to the bottom of the page and click on ‘Show Advanced Settings’....

Chosen Solution Since the original poster has not replied, I will. I have a push lawnmower with a Honda engine. It is harder to push last year than last year. Does it just need a tune up? Pennylynn, If the lawn mower has not been serviced in a few years, you should have it serviced, The blades are probably dull making it harder to push, the under body may be all clogged up with grass, the wheel hubs may require cleaning/lubrication and engine RPM may need adjusted if not running at optimum....

Chosen Solution I have a 2005 Altima in Canada with a Running Lights Module. Checked the fuses but the High beams don’t seem to work, and only the low beams seem to work. @raezorsharp check the headlamp high relay, located in the IPDM E/R (intelligent power distribution module engine room). “High Beam Operation/Flash-to-Pass Operation With the lighting switch in 2ND position and placed in HIGH or PASS position, the BCM (body control module) receives input requesting the headlamp high beams to illuminate....

Chosen Solution This computer has the Hinges/screws missing to hold and/or open the laptop. How do I fix it? Walter, take a look at the Dell manual right here. If you are missing the hinges, you can get those from places like this. The screw set is available on places like this. Remember that you are dealing with metric screws, and it look like your hinges use M2.5X5mm Hope this helps, good luck....

Chosen Solution Hi guys i need some help, my son just though his X-Shot Clip Blasters from ZURU and some parts came out 1 and 2, when i openeded the parts 3 and 4 didnt come out so i just need some help to assamble the gum pls ty My advice is to use trial and error, align the parts were you think they go, put it back together and see if it works, if it doesn’t, try again....

Chosen Solution There are pictures on the internal memory of the camera that I took before installing the SD card. How can I get them off the camera In the menu, there should be an option to move your internal storage to the SD card. The option should be under the gear icon or wrench icon. Hope this helps!

Chosen Solution I’ve erase everything from the SD card and I used it as an internal storage but everything was really slow and it stopped working, so I reset all. And I was wondering how can I download things (music, pictures, videos) and save it in the SD card without erasing everything again To save pictures to the SD card, go to your camera app, into settings and enable save to SD card....

Chosen Solution Lost my keys an had to order new transceiver keys an ingintion lock for my truck but when I installed new ingintion lock the theft light flashes for 10 seconds n turns off but truck won’t start everything I researched is pointing to Pat’s system. Would u have any info on how to disable it would be greatly appreciated Follow the steps listed here: https://itstillruns.com/reset-theft-prot…

Chosen Solution my satellite remote won’t turn on my t.v.. Just go to this dish site select your remote and look up the codes for your sanyo tv then follow the instructions for entering the code into your remote. https://www.mydish.com/support/products/…

Chosen Solution My Note4 has been continously crashing for a week. I purchased a replacement battery from Samsung and the problem remains. Occasionally I get the little green Android on screen with a message saying “Downloading… Do not turn off target!!. There have been no new apps installed and I have a malware protector which reports no threats. I have backedup the phone to the Samsung cloud. Thanks, DL take a look on this page https://thedroidguy....

Chosen Solution I would like to know how to open the device to change the battery. At the moment it is not necessary but because the battery runtime is about the same on my 6 month old Oasis 3 as on my 6 year old (heavily used) Paperwhite i bet that i will have to change the battery after ~3 years. Don´t get me wrong. I love my Oasis. Size, buttons to flip pages, automatic orientation rotation and case shape (which makes it extremely comfortable to hold)....

Chosen Solution My 2nd phone, which is the zenphone 6, fell down on the street, and now the glass is broken and the LCD is too. How can I replace those? I am asking here, because I haven’t found a guide anywhere. You must buy a digitizer and LCD screen assembly. You cannot remove the digitizer separately so you must buy the whole assembly even if the LCD screen it self isn’t broken....

Chosen Solution So..I have a 2001 Club Car DS 48v cart. It seems to charge normally meaning the charger runs and shuts off when batteries are seemingly fully charged as I see that over the course of the charge the meter creeps toward 0. However, I will come back later and see that the charger has kicked back on. I guess my question is: Is this cycle of charger off and on “normal” behavior or should I be checking for a current draw or short somewhere?...

Chosen Solution I was wondering if anyone knew of any other Hackintosh guides except tonymacx86’s guide because UniBeast would not work for me when I tried to create the USB stick for macOS Yosemite because when I tried to select an OS it would not let me select Yosemite even though I have downloaded the Yosemite installer app. I couldn’t find any other guides that I understood completely (surprising right? Lol) so could anyone refer me to a good guide or walk me through how to set this up (unlikely but who knows there could be a nice one out there that understands it completely)?...

Chosen Solution I’m going to replace both speakers, ssd and battery into my MacBook. I’d like to know if I have to buy some parts needed to reassembly laptop, e.g. gasket, glue, adhesive. Who a similar experience had ? Can you suggest what necessary to buy please? Each guide I’ve listed here gives you a shopping list of tools and needed parts. The only task that needs any thing is replacing the battery as you need some solvent which if you get the kit will be supplied....

Chosen Solution I purchased an iFixit kit to replace the hard drive on my 2014 iMac 21.5” model 2805. I got to the point where one needs to unplug two display assembly cables : the display data cable and the display power cable. Which I did as instructed, but then realised there is a third cable between the board and the display. I don’t know what it is and it doesn’t seem to want to come out easily....

Chosen Solution Exactly what it says in the title. I have been back and checked all connections and connectors. Of which are all in place. Can anyone shed some light on this issue? Thanks This post is useless if someone has the knowledge to replace the battery they ought to know how the home button works “gold prongs”. What is the resistor next to the u3 chip? That’s kinda important if you want to order one and how do you replace such a small resistor (small chip size)....